FA Integrated Water Purifier
The integrated fully automatic Efficiently water purifier integrates mixing reaction, coagulation and sedimentation, and filtered water. It automatically completes the operation procedures of dosing, water distribution, mud discharge, backwash, and sewage discharge by combining the special devices of the equipment itself with electrical control.
In addition to the management of the first pump room and dosing system, the water purification device itself from the reaction, flocculation, sedimentation, mud collection, mud, water collection, water distribution, filtration, backwash, sewage and other a series of operation Stroke sequence, to achieve the requirements of the automatic operation of the duty officer as long as the water quality monitoring and measurement of the work on a regular basis without the need to operate and manage the water purification device.
High concentration of flocculation layer, can make the impurity particles in the raw water, in which the full collision contact, adsorption rate, and thus can adapt to a variety of raw water temperature and turbidity, impurity particles removal rate is high. In certain conditions of use, also has the function of algae removal.
The swift sludge thickening chamber and adjustable automatic sludge discharging system can ensure that the excess sludge impurities are removed in time, so as to ensure a stable removal rate of impurity particles.
Efficiently flocculation and sedimentation effect, so that the sedimentation Effluent Quality has been maintained in good condition.
The novel and original water collection system and the lowest head of water collection make the water collection more uniform and effective, not only improving the volume utilization coefficient, but also accumulating considerable power saving effect due to its extremely small head of water collection.
Automatization of water purification system, both to ensure the Efficiently filtration of water purification system, (in the original water turbidity is less than 3000mg / L, the turbidity of the water after filtration can be maintained at 3mg / L or less) but also automatic backwashing, without the need to set up a separate backwash pump or Air Compressor and other electrical equipment, to save a lot of infrastructure investment and daily operation, repair, maintenance costs.
The low self-consumption rate is around <5%, which plays a positive role in saving limited water resources.
Occupies an area of small, compared with the general water purification structures, can save occupying an area of <50% or more, the height of about 4.10 meters, indoor and outdoor can be placed.
Easy to expand, remodel, and reuse, easy to relocate or easy to reuse.
| Equipment Model | Throughput (m3/h) |
Mud Disposal Interval（H） | Run Weight (tons) | Filter Media Filling Height（mm） | Suspended Solids in Influent Water（mg/L） | Suspended Solids in Effluent（mg/L） | Dimension L×W×H(mm) |
|
|---|---|---|---|---|---|---|---|---|
| FA-2 | 1 | 6-24 | 5 | 800 | ≤3000mg/L | ≤3mg/L | 1000×800×4500 | |
| FA-3 | 3 | 6 | 800 | 1000×1000×4500 | ||||
| FA-5 | 5 | 12 | 800 | 1500×1500×4500 | ||||
| FA-10 | 10 | 18 | 800 | 2400×1500×4500 | ||||
| FA-15 | 15 | 25 | 800 | 2400×2000×4500 | ||||
| FA-20 | 20 | 35 | 800 | 3000×2500×4500 | ||||
| FA-25 | 25 | 45 | 800 | 3200×3000×4500 | ||||
| FA-30 | 30 | 52 | 800 | 3800×3000×4500 | ||||
| FA-40 | 40 | 68 | 800 | 5000×3000×4600 | ||||
| FA-50 | 50 | 81 | 800 | 6000×3000×4600 | ||||
| FA-60 | 60 | 92 | 800 | 7000×3000×4600 | ||||
| FA-70 | 70 | 110 | 800 | 8000×3000×4600 | ||||
| FA-80 | 80 | 120 | 800 | 9000×3000×4600 | ||||
| FA-90 | 90 | 140 | 800 | 9600×3300×4600 | ||||
| FA-100 | 100 | 160 | 800 | 10000×3500×4600 | ||||
| FA-150 | 150 | 210 | 800 | 12000×4600×4600 | ||||
| FA-200 | 200 | 250 | 800 | 14000×5000×4600 | ||||
| FA-250 | 250 | 330 | 800 | 16000×5000×4600 | ||||
| FA-300 | 300 | 385 | 800 | 16000×7000×4600 | ||||
