In-flow mesh plate grating adopts single grating over-water design, which greatly improves the over-water Flow and reduces the head loss, and the grating is installed vertically, which effectively saves the space.
In the structural design has a reliable self-purification ability, no dirt entanglement, stagnation phenomenon, and the bottom of the grille shall not have dirt accumulation to form a dead end.
There is no need to rotate the brush to clean the stencil cutoff surface.
New transmission device, reducer for the advanced shaft-mounted installation of convenient centering;
The in-flow mesh plate grating dewatering machine is adapted to the use requirement of 24h continuous work.
| Parameter Model | NGS65 Series | NGS80 Series | NGS115 Series |
|---|---|---|---|
| Applicable Drainage Depth（mm） | 1500-6000 | ||
| Applicable Drainage Width（mm） | 1000-1500 | 1500-2000 | 2000-2500 |
| Effective Length of Stencil (mm) | 600-2000 | ||
| Filter Aperture（mm） | 1-15 | ||
| Overgrid Flow Rate（m/s） | 0.6 | ||
| Transmission Power（KW） | 0.37-1.5 | ||
| Backwashing Power（KW） | 1.5-5.5（Depending on the length of the stencil） | ||
| Conveying Power（KW） | 0.37-1.1 | ||
| Flushing Pressure（Mpa） | 0.6 | ||
| Flushing Water Volume（m³/h） | 4-20 | ||
| Headloss (cm) | ＜30 | ||
